We offer Brake Press bending up to 2500 tons capacity to 40′. With Hydraulic PLC / CNC, we can brake press cones, transitions and custom forming. Contact us to start a quote on your brake press bending project today.
Capacity – 175 / 400 / 660 / 1000 / 2500 Tons to 40′
Hydraulic PLC / CNC
Cones, Transitions, Custom Forming
Brake Press Projects:
Kubes Steel is Where Metal Takes Shape! From 3/4″ copper plate our skilled operators create these conical shaped 17′ long cylinders as a single piece with our 2500 Ton Brake Press. Custom fabricated parts like these have many uses in the metals industry such as the melt shop, foundry and as furnace liners. Check out…
Kubes Steel is your one stop shop for custom fabrication. Here we’re working on another large scale fabrication job. These curved steel plates have had bracing and flanges installed after rolling.
Kubes Steel is your one stop shop for custom fabrication projects of any size. We turn drawings into finished projects, like this industrial ducting. All fabrication services were provided by Kubes in our own shops, including delivery.
Kubes Steel custom fabricated this large steel cylinder, also known as a “Shell” for use in a Rotary Drum Dryer. Inside the shell, “Flights” are welded to the sides which ensure even movement and drying of material.
Kubes Steel turned flat plate steel into these tower halves using our brake presses and plate roller. The halves will be assembled on site by the customer.
Kubes Steel custom fabricated this split holding tank in 2 halves, including custom made pipe to connect the tank.
Kubes Steel can fabricate a wide range of products, large and small. We recently formed these customized corrugated 3/8″ thick stainless steel sections which will be used for a marine break water.
At Kubes Steel, custom fabrication is our specialty. We can make almost anything you can imagine. Our wide range of equipment enabled our skilled operators to fabricate this Gas Flare Stack completely in-house, including delivery of the finished piece.
Kubes was selected as the fabricator to make these towers for electrical transmission lines. Each half is formed on our newest brake press and then welded together before shipping out to the installation site. Here, our operators are forming one of the halves and we can see a completed half as well.