Manufacturing

Manufacturing Projects:

Kubes Steel offers refurbishment services for hard faced rolls used in several industries including aggregates / mining, coal and manufacturing / steel making. After gouging out the cracked sections, they are welded back in with alloy steel and then smoothed down in preparation for hard faced overlay. Rolls of this kind can also be straightened as part of our maintenance…

Service Category:
Project Date:
Wednesday, October 30, 2019
Material:

Kubes Steel is your one stop shop for custom fabrication projects of any size. We turn drawings into finished projects, like this industrial ducting. All fabrication services were provided by Kubes in our own shops, including delivery.

Kubes Steel custom fabricated this large steel cylinder, also known as a “Shell” for use in a Rotary Drum Dryer. Inside the shell, “Flights” are welded to the sides which ensure even movement and drying of material.

Kubes Steel custom fabricated this heavy industrial door and it’s mounting frame to withstand extreme environments. Both pieces will be lined with an insulator, adhering to the welded nodes. The highest degree of quality and percision is required during fabrication to ensure these pieces will work safely and withstand their operating environment.

Project Date:
Wednesday, July 3, 2019
Market:
Material:

At Kubes Steel, induction bending is one of our specialties. Our skilled operator performed the induction bending service on these thick stainless steel pipe sections. Due to the thickness, careful preparation had to be taken to ensure a proper bend without damaging the pieces.

Kubes Steel custom fabricated this split holding tank in 2 halves, including custom made pipe to connect the tank.

Kubes Steel is custom fabricating several of these Roll Racks down at our shop on Burlington St. They feature a light weight frame holding 4″ thick uprights. 

Project Date:
Tuesday, June 25, 2019
Market:
Material:

This combustion tube was custom fabricated by Kubes Steel to strict tolerances. The tube is 26′ long with the shape held at a diameter of 77″ on each end. Made of mild steel, the tube will be coated with a ceramic lining before going into service. 

Kubes specializes in custom fabrication jobs like this. As a full service shop, we were able to take the drawings and deliver the finished pieces. These Slag Runner sections were fully assembled in our yard to ensure a seamless fit before delivery.

At Kubes Steel, custom fabrication is our specialty. We can make almost anything you can imagine. Our wide range of equipment enabled our skilled operators to fabricate this Gas Flare Stack completely in-house, including delivery of the finished piece.