Kubes Steel offers the most comprehensive range of technology, equipment and capacity to roll, form and bend steel sections, tubing, pipe, channel, angle and HSS in North America. Rolling, Forming & Bending is what we are known for and what we do best. Explore our work below or Contact Us today to start your quote.
Request a Quote
Rolling & Bending
Rolling & Bending Projects:
2019.10.23 - North Beach Miami Bandshell Canopy
Request a Quote
Kubes Steel is cold rolling the AESS pipe sections for the "ring" portion and fabricating the central column of the sun shade canopy for the new Bandshell park in North Beach, Miami, FL. The sections are fabricated and fitted in our shop, then shipped to site for final assembly. The full diameter of the ring is 60' and our work must be accurate to 1/16" across all pieces. The completed column of 24" schedule 80 pipe will stand 32' above the ground, providing support for the canopy ring surrounding it via cable stays.
Kubes Steel is your one stop shop for custom fabrication projects of any size. We turn drawings into finished projects, like this industrial ducting. All fabrication services were provided by Kubes in our own shops, including delivery.
Kubes Steel custom fabricated this large steel cylinder, also known as a "Shell" for use in a Rotary Drum Dryer. Inside the shell, "Flights" are welded to the sides which ensure even movement and drying of material.
At Kubes Steel, induction bending is one of our specialties. Our skilled operator performed the induction bending service on these thick stainless steel pipe sections. Due to the thickness, careful preparation had to be taken to ensure a proper bend without damaging the pieces.
This combustion tube was custom fabricated by Kubes Steel to strict tolerances. The tube is 26' long with the shape held at a diameter of 77" on each end. Made of mild steel, the tube will be coated with a ceramic lining before going into service.
Kubes Steel is your one stop shop for fabrication. We provided all the services needed to fabricate this 30 ton heavy industrial lift ring, including connector fittings, cold bending and welding. All pieces are load tested in the shop and will be delivered to the customer ready to assemble.