The custom fabrication shop at Kubes Steel is where metal takes shape. For this project, we fabricated the cylinder, base and end covers for this industrial grade composter. In addition, we also integrated the electrical control panel with motors and required sensors. The exterior of the drum was insulated with 2” of spray-foam insulation. The…

Kubes Steel’s testing and certification service means you can rest assured that your job will be done to your exact specifications and parts will be received ready to use. We recently engineered and built this custom 16′ x 16′ platform to test 53′ long custom articulating fabrications weighing 53,000 lbs.

The custom fabrication job for these pipe assemblies required press brake work, plate rolling and welding to bring all the pieces together. After finishing at the paint booth, they will ship direct to the building site.

Kubes Steel is cold rolling the AESS pipe sections for the “ring” portion and fabricating the central column of the sun shade canopy for the new Bandshell park in North Beach, Miami, FL. The sections are fabricated and fitted in our shop, then shipped to site for final assembly. The full diameter of the ring…

Kubes Steel is your one stop shop for custom fabrication. Here we’re working on another large scale fabrication job. These curved steel plates have had bracing and flanges installed after rolling.

Kubes Steel custom fabricated this large steel cylinder, also known as a “Shell” for use in a Rotary Drum Dryer. Inside the shell, “Flights” are welded to the sides which ensure even movement and drying of material.

Kubes Steel custom fabricated this heavy industrial door and it’s mounting frame to withstand extreme environments. Both pieces will be lined with an insulator, adhering to the welded nodes. The highest degree of quality and percision is required during fabrication to ensure these pieces will work safely and withstand their operating environment.

This combustion tube was custom fabricated by Kubes Steel to strict tolerances. The tube is 26′ long with the shape held at a diameter of 77″ on each end. Made of mild steel, the tube will be coated with a ceramic lining before going into service. 

Kubes specializes in custom fabrication jobs like this. As a full service shop, we were able to take the drawings and deliver the finished pieces. These Slag Runner sections were fully assembled in our yard to ensure a seamless fit before delivery.

Kubes Steel is your one stop shop for fabrication. We provided all the services needed to fabricate this 30 ton heavy industrial lift ring, including connector fittings, cold bending and welding. All pieces are load tested in the shop and will be delivered to the customer ready to assemble.