Follow Us:      

Call Us: 1.877.327.8357

Menu

Kubes fabricated and machined these heavy duty, industrial scale components. We are specialists in fitting, welding, machining and assembly of any components like these.

Project Date: 
Wednesday, April 10, 2019
Market: 
Material: 

These spiraled staircase stringers are custom fabricated by Kubes Steel. We roll and assemble them in our shop and ship direct to site.

Service Category: 
Project Date: 
Tuesday, April 2, 2019
Market: 
Material: 

Kubes had to use a special setup to achieve the bends required by our customer when fabricating these staircase treads.

Service Category: 
Project Date: 
Tuesday, March 26, 2019
Material: 

Our team induction bends sections of pipe to customer requirements and inspects the finished product.

Service Category: 
Project Date: 
Wednesday, March 20, 2019
Material: 

Kubes was selected as the fabricator to make these towers for electrical transmission lines. Each half is formed on our newest brake press and then welded together before shipping out to the installation site. Here, our operators are forming one of the halves and we can see a completed half as well.

Project Date: 
Tuesday, March 5, 2019
Market: 
Material: 

The beams for this sculpture were rolled by Kubes and shipped to Russell, Manitoba where it was installed over one of the main intersections in town. This project was part of a community effort to replace the previous wooden arch sculpture. After considering several designs and materials, Kubes was selected to provide all the work including sourcing the W18 x 46 beams, rolling them to shape and welding of beams and plate members. Assembled beams were shipped to site ready to erect.

Project Date: 
Wednesday, February 27, 2019
Market: 
Material: 

Here is one of three Roll Cradles fabricated by Kubes Steel.

Service Category: 
Project Date: 
Friday, February 22, 2019
Market: 
Material: 

Our forming methods are precise. We can custom bend and form all types of metal to any profile required. These troughs are pressed and then rolled from 1/4" thick mild steel to become oil vats. These pieces are held to within 1/16” on the ends.

Service Category: 
Project Date: 
Tuesday, December 18, 2018
Material: 

We take a look at some of the projects being worked on at the Kubes Steel shop on Industrial Drive in Hamilton. There are many different types of Heavy Fabrication taking place.

Project Date: 
Friday, October 5, 2018
Material: 

Large section of pipe bent to a tight radius on the Kubes Steel Induction Bender

Project Date: 
Wednesday, December 13, 2017
Market: 
Material: 

Pages