Kubes Steel is your one stop shop for custom fabrication projects of any size. We turn drawings into finished projects, like this industrial ducting. All fabrication services were provided by Kubes in our own shops, including delivery.

Kubes Steel custom fabricated this heavy industrial door and it’s mounting frame to withstand extreme environments. Both pieces will be lined with an insulator, adhering to the welded nodes. The highest degree of quality and percision is required during fabrication to ensure these pieces will work safely and withstand their operating environment.

At Kubes Steel, induction bending is one of our specialties. Our skilled operator performed the induction bending service on these thick stainless steel pipe sections. Due to the thickness, careful preparation had to be taken to ensure a proper bend without damaging the pieces.

Kubes Steel is custom fabricating several of these Roll Racks down at our shop on Burlington St. They feature a light weight frame holding 4″ thick uprights. 

Kubes Steel custom fabricated this split holding tank in 2 halves, including custom made pipe to connect the tank.

Kubes specializes in custom fabrication jobs like this. As a full service shop, we were able to take the drawings and deliver the finished pieces. These Slag Runner sections were fully assembled in our yard to ensure a seamless fit before delivery.

This combustion tube was custom fabricated by Kubes Steel to strict tolerances. The tube is 26′ long with the shape held at a diameter of 77″ on each end. Made of mild steel, the tube will be coated with a ceramic lining before going into service. 

At Kubes Steel, custom fabrication is our specialty. We can make almost anything you can imagine. Our wide range of equipment enabled our skilled operators to fabricate this Gas Flare Stack completely in-house, including delivery of the finished piece.

Here is one of three Roll Cradles fabricated by Kubes Steel.

Our forming methods are precise. We can custom bend and form all types of metal to any profile required. These troughs are pressed and then rolled from 1/4″ thick mild steel to become oil vats. These pieces are held to within 1/16” on the ends.