Mar 23, 20182018.03.23 - Queen-Richmond Centre West, TorontoKubes Steel rolled and fabricated the 8 foot tapered 'feet' for each of the 3 delta frames inside the Queen-Richmond Centre West. Located at 134 Peter Street, Toronto Ontario.
Feb 22, 20182018.02.28 - Pedestrian Bridge, Greensville, OntarioWe tracked down an early Kubes Steel fabrication project to Greensville, Ontario. This pedestrian bridge, spanning across Spencer Creek is supported by series of original limestone piers dating back... more
Jan 19, 20182018.01.19 - Four Seasons, Emerald CityCustom fabrication work by Kubes Steel. Kubes Steel fabricated the steel structure for each of the pillars overtop of which the coloured rings were placed.
Jan 02, 20182018.01.02 - Elevator Shaft Plate RollingMassive sections of plate with a diameter of 64’ get rolled at Kubes Steel, part of a large elevator shaft reline project.
Dec 28, 20172017.12.28 - Caesars WindsorKubes Steel did the rolling and bending work for the entrance awning for Caesars Casino in Windsor Ontario, located along the shore of the Detroit River.
Dec 13, 20172017.12.13 - Induction Bending PipeA large section of steel pipe that was bent to a tight radius on the Kubes Steel Induction bender.
Nov 21, 20172017.11.21 - HSS Induction Bending to 90°The Induction Bending machine at Kubes Steel gets put to work bending Sections of HSS with dimensions 12x4x3/8 gets to a 90° angle.
Nov 03, 20172017.11.03 - Grey Roots Museum & ArchivesThe feature piece at the entrance of the Grey Roots Museum and Archives in Georgian Bluffs Ontario features flat bar rolled by Kubes Steel.
Oct 30, 20172017.10.30 - Niagara SpeedwayKubes Steel rolled the structural steel sections for the soon to be open Niagara Speedway, in Niagara Falls, Ontario. When it opens it will be the largest elevated Go Kart track in North America.
Aug 18, 20172017.08.18 - Summer CloudsKubes Steel did the pipe bending for the tapered 'legs' of these public art sculptures in Toronto, Ontario collectively known as Summer Clouds, by Jaakko Pernu.
Aug 15, 20172017.08.15 - Tecumseh MonumentThe Tecumseh Monument is located in Thamesville Ontario. Resembling a large turtle shell, the stainless steel pipe that makes up the structural skeleton of the sculpture was rolled by Kubes Steel.
Aug 14, 20172017.08.14 - Burgoyne Bridge St. CatharinesThe completed Burgoyne Bridge in St. Catharines Ontario features 42" steel pipe bent by Kubes Steel.
Aug 11, 20172017.08.11 - Guelph Water Tower & Pumping StationThe Guelph Water Tower and Pumping Station on a dark and stormy night. Kubes Steel did the rolling and bending for the pumping station roof beams and the rolling and bending for the water tower.
Jul 20, 20172017.07.20 - Turbine Platform ProgressProgress on the fabrication of a turbine platform for a hydro-electric project in the US.
Jul 12, 20172017.07.12 - AESS Fabrication Feature Piece TorontoOne of our first feature pieces, this stainless steel sculpture 'Willow Leaf' wraps around a glass bridge that connects two condo towers on Front Street in Toronto. We were able to capture these... more
Jun 22, 20172017.06.22 - Bisulfite Tanks Shipping OutTwo custom fabricated bisulfite tanks shipping out from Kubes Steel's Jones Road location in Stoney Creek Ontario.
Jun 19, 20172017.06.19 - HSS Rolling & Bending Hard Way & The Easy WayRectangular sections of HSS (Hollow Structural Section) are getting bent at Kubes Steel the hard way, and the easy way.
Jun 15, 20172017.06.15 - George C. King Bridge East CalgaryKubes Steel did the pipe bending for George C. King bridge in East Calgary. The pedestrian bridge opened in 2014 and features two spans. It connects East Calgary over the Bow River to Bridgeland.
May 24, 20172017.05.24 - Aerial Photos of the Custom Fabricated Bisulfite TanksAerial photography of the custom fabricated bisulfite tanks for a chemical plant in the US.
May 18, 20172017.05.18 - Bisulfite TanksTwo custom fabricated bisulfite tanks post successful water test, no leaks!
May 04, 20172017.05.04 - Custom Fabricated Bisulfite TankThe second of two bisulfite tanks custom fabricated at the Kubes Steel Jones Road shop.
Apr 10, 20172017.04.10 - Completed Burgoyne BridgeThe completed Burgoyne Bridge in St. Catharines featuring 30 inch pipe bent by Kubes Steel.
Apr 07, 20172017.04.07 - Bisulfite Tanks2 custom fabricated bisulfite storage tanks with dimensions 12' - 23' - 6". The one tank recently got a pass in x-ray testing and is now ready for water testing.
Apr 07, 20172017.04.07 - Custom Fabricated Acid TankCustom fabricated acid tank in the horizontal position awaiting movement outside for a full tank water test.
Mar 30, 20172017.03.30 - Custom Fabricated Acid TankOne of the custom fabricated acid tanks manufactured at Kubes Steel's Jones Road shop.
Nov 07, 20162016.11.07 - Vaughan Metropolitan Centre Subway Station Under ConstructionKubes Steel supplied rolled beams and plate for the construction of the new Vaughan Metropolitan Centre Subway Station, shown here, under construction.
Nov 07, 20162016.11.07 - Lakeview Water Treatment Plant RevisitKubes Steel supplied the rolled structural steel sections for the update to the Lakeview Water Treatment plant in Mississauga. Revisiting the location in 2016 shows the completed building and... more
Nov 04, 20162016.11.04 - Rolled HSS at the Mississauga GO StationRolled HSS from Kubes Steel featured in the outside structure of this GO Station parking garage in Mississauga, Ontario.
Nov 03, 20162016.11.03 - Burgoyne Bridge Arches with Pipe Bent by KubesThe arches of the Burgoyne Bridge, erected in St Catharines Ontario was manufactured with 30 inch pipe bent by Kubes Steel.
Nov 01, 20162016.11.01 - Elevator Shaft Reline SectionsCustom fabricated sections for an elevator shaft reline, awaiting shipment at Kubes Steel.
Sep 28, 20162016.09.28 - Beam CamberingCambering steel beam sections at Kubes Steel.
Sep 12, 20162016.09.12 - Fabricating Elevator Shaft Reline Sections in the ShopSections of the elevator shaft reline project in the shop. Custom fabricated by Kubes Steel.
Jul 20, 20162016.07.20 - Fabricated Bridge Arches Shipping OutFabricated sections of the Burgoyne Bridge featuring 30 inch pipe bent by Kubes Steel gets shipped out from Walters on it's way to paint.
Jul 20, 20162016.07.20 - Elevator Shaft Reline SectionsSections of the elevator shaft reline project, rolled and custom fabricated by Kubes Steel.
Jul 13, 20162016.07.13 - Aluminum FramingAluminum framing assembly nearing completion at the new US Embassy, London, UK.
Jun 03, 20162016.06.03 - U.S. Embassy, London, UKInstallation of the curved feature piece on the outside of the new U.S. Embassy in London, UK. Features aluminum, carbon steel and stainless steel.
May 31, 20162016.05.31 - Fabricated Support Girders Shipping OutA pair of support 57 ft. long girders fabricated by Kubes Steel for the Moise SAFRA Community Center shipping out from Kubes Steel. 45,000 lbs each.
May 20, 20162016.05.20 - NY Metal Sculpture Fabrication in Stainless SteelRecently completed metal sculpture custom fabricated by Kubes Steel in stainless steel. NY, New York.
Apr 26, 20162016.04.26 - Elevator Shaft RelinePhotos of the progress on a heavy, custom fabricated elevator shaft reline for a mining project.
Mar 30, 20162016.03.30 - Bending 30" PipesPhotos showing the final 30" steel pipes being bent by Kubes Steel along with some of the completed pipes shipping out.
Mar 19, 20162016.03.19 - Phoenix AZ LRT Station TourCustom fabricating and rolling and bending work by Kubes featured at the new Phoenix AZ LRT Stations.
Mar 07, 20162016.03.07 - Bending 30" PipesPhotos of one of the long, heavy pipes with a 30" diameter bent by Kubes Steel.
Feb 08, 20162016.02.08 - Phoenix AZ LRT Extension 19th Ave StationKubes Steel did custom fabricating and rolling and bending for the new LRT Extension stations in Phoenix AZ.
Sep 15, 20152015.09.15 - Induction Bending Pipeline at Kubes SteelLong section of tube gets bent for a pipeline using the induction bending method at the Kubes Steel rolling and bending shop.
Sep 14, 20152015.09.14 - On location at A Place of Many Grasses with Wisdom, a large public art sculpture by Gordon Reeve made from stainless steel pipe/tube rolled by Kubes SteelOn location at A Place of Many Grasses with Wisdom, a large public art sculpture by Gordon Reeve made from stainless steel pipe/tube rolled by Kubes Steel.
For more info visit:
Artist Gordon Reeve's... more
Aug 06, 20152015.08.06 - Induction Beam BendingA steel beam gets bent at the Kubes Steel rolling and bending shop using the induction bending method.
Aug 04, 20152015.08.04 - Induction Bending HSS to a Tight RadiusInduction bending square HSS to a tight radius on the Kubes Steel induction bender.
Jul 28, 20152015.07.28 - Induction Bending HSSPhotos showing the progress of a section of HSS being bent on the Kubes Steel induction bending machine.
Jul 22, 20152015.07.22 - Induction Bending HSSPhotos of a section of High Strength Structural Steel (HSS) being bent on the Kubes Steel Induction bender.
Jul 20, 20152015.07.20 - Induction Bending PipePhotos of a section of steel pipe being bent on the induction bender at Kubes Steel's rolling & bending shop.
Jan 15, 20152015.01.15 - Penn Presbyterian Medical Center Feature Staircase InstallationInstallation of the completed feature staircase for the Penn Presbyterian Medical Centre.
Nov 25, 20142014.11.25 - Aluminum Extrusion Rolling & Bending SamplesPhotos of variously sized aluminum extrusions that can be rolled and bent by Kubes Steel.
Oct 03, 20142014.10.03 - Penn Presbyterian Medical Centre StaircaseKubes Steel did the rolling, bending and fabrication of the feature staircase for the Penn Presbyterian Medical Centre.
Sep 18, 20142014.09.18 - Veil - Conrad Hotel, New York City, NY"Veil" by Monica Ponce de Leon, installed at the Conrad Hotel in New York City, NY.
Sep 18, 20142014.09.18 - AESS Staircase BMW North AmericaAESS Feature staircase at BMW North America Headquarters in Woodcliff Lake, New Jersey. Kubes Steel did the rolling and bending of the railing for this project.
Sep 17, 20142014.09.17 - Feature Staircase - Gettysburg CollegePhotos of the feature staircase at Gettysburg College, PA. Steel rolled and bent by Kubes Steel.
Sep 17, 20142014.09.17 - American Music Theatre Grand StaircasesPhotos of the completed Grand Staircases at the American Music Theatre in Lancaster, Pennsylvania.
Sep 08, 20142014.09.08 - Summer Clouds Concord Park Place North YorkPhotos of Summer Clouds, a public art sculpture located at Concord Park Place, in North York Ontario.
Sep 08, 20142014.09.08 - On Site at the Four Seasons Installation in North YorkPhotos onsite in North York Ontario of the Four Seasons installation by Douglas Coupland. Underlying fabrication structure of the metal sculptures was custom fabricated by Kubes Steel.
Sep 05, 20142014.09.05 - Onsite at the Stone Road Mall in Guelph OntarioPhotos taken onsite of the fabricated steel awning featuring rolled pipe by Kubes Steel.
Sep 05, 20142014.09.05 - Water Tower & Pumping Station Guelph, OntarioPhotos taken in Guelph Ontario of the completed pumping station and water tower featuring rolled steel by Kubes Steel.
Sep 05, 20142014.09.05 - Curved StaircaseSome photos of a curved staircase custom fabricated by Kubes Steel, installed at the Brotherhood of Carpenters Local 1946 office in London, Ontario.
Sep 04, 20142014.09.04 On site in Toronto at the Concord CityPlaceThe finished installation of 'Approaching Red' in Toronto, Ontario.
Sep 04, 20142014.09.04 - Queen Richmond Centre West TorontoKubes Steel did the custom fabricating of these tapered legs as part of the feature piece of the Queen Richmond West Centre in Toronto.
Aug 27, 20142014.08.27 - Wisdom Sculpture Taking ShapeWisdom Sculpture by Gordon Reeve Taking Shape at Kubes Steel's Burlington Street Shop.
Aug 26, 20142014.08.26 - Wisdom Sculpture Assembly at Kubes Steel's Burlington Street Shop in Hamilton, OntarioStainless steel pipe/tube being assembled at Kubes Steel's Burlington Street Shop in Hamilton, Ontario. Part of the manufacture of the public art installation Wisdom at A Place of Many Grasses by... more
Apr 22, 20142014.04.22 - The Guardian Roller CoasterPhotos from the outside of Wonder Mountain showing sections of The Guardian, a new roller coaster for Canada's Wonderland custom manufactured by Kubes Steel.
Apr 02, 20142014.04.02 - The Guardian - Wonder MountainA look up towards Wonder Mountain of The Guardian, a new roller coaster for Canada's Wonderland manufactured by Kubes Steel.
Apr 01, 20142014.04.01 - The Guardian - Assembled Outside ViewOutside view showing a section of The Guardian roller coaster manufactured by Kubes alongside it's adjoining railing and stairs.
Mar 31, 20142014.03.31 - The Guardian - On Site AssemblyOn site assembly of The Guardian Roller Coaster.
Jan 15, 20142014.01.15 - The Guardian delivery to Canada's WonderlandA section of The Guardian delivered by Kubes Steel to Canada's Wonderland.
Jan 13, 20142014.01.13 - The Guardian - Wonder MountainWonder Mountain getting ready for the installation of The Guardian.
Dec 24, 20132013.12.24 - The Guardian - Final AssemblyFinal assembly of The Guardian, roller coaster for Canada's Wonderland, custom manufactured by Kubes Steel.
Dec 20, 20132013.12.20 - The Guardian - Load to PaintFitted and fabricated, sections of The Guardian, roller coaster for Canada's Wonderland ships out for painting.
Dec 18, 20132013.12.18 - The Guardian - 2nd Trial FitSecond trial fit of a section of The Guardian, a custom manufactured roller coaster for Canada's Wonderland, fabricated by Kubes Steel.
Dec 12, 20132013.12.12 - The Guardian - AssemblyTrial assembly of a section of The Guardian roller coaster for Canada's Wonderland.
Nov 28, 20132013.11.28 - The Guardian Trial FitEarly trial fit of The Guardian roller coaster for Canada's Wonderland.
Nov 25, 20132013.11.25 - 1st Rolled Pipes for the Guardian Roller Coaster1st round of steel pipes rolled for The Guardian roller coaster, Canada's Wonderland.
Sep 28, 20132013.09.28 - Brake Press Forming a Section of Steel PlateA section of steel plate brake press formed at Kubes Steel.
Mar 10, 20132013.03.18 - Draft Tube Liner Penstock FabricationPhotos showing the fabrication of penstock draft tube liners for the Cannelton Hydro Project at the Kubes Steel Burlington Street Shop in Hamilton, Ontario.
Mar 01, 20132013.03.01 - Cannelton Hydro Project Fabrication ProgressPhotos showing the fabrication of the hydroelectric penstock draft tube liners for the Cannelton Hydro Project. This section of work was being done at our Burlington Street shop in Hamilton, Ontario...
Feb 07, 20132013.02.07 - Newtown Creek DigestersThe Newtown Creek Digesters, featuring a stainless steel railing system manufactured by Kubes Steel.
Jan 31, 20132013.01.31 - Draft Tube Liners Moved into PositionThese photos come courtesy of The International Brotherhood of Boiler Makers and show the assembled sections of the draft tube liners fabricated by Kubes Steel being moved into position. Each... more
Jan 27, 20132013.01.27 - Plate Rolling
Jan 23, 20132013.01.23 - St. Patrick's Bridge - Rolled PipeRolled pipe being custom fabricated into the main arches for St. Patrick's Bridge, Calgary, AB.
Jan 09, 20132013.01.09 - Fabricating Draft Tube LinersSections of the hydro draft tube liners getting fabricated at Kubes Steel.
Dec 31, 20122012.12.31 - Fan Housing AssembliesCustom fabricated fan housing assemblies.
Dec 29, 20122012.12.29 - Lakeview Water Treatment PlantConstruction on the new Lakeview Water Treatment plant moves closer to completion, with large sections of the roof completed. The curved roof beams were rolled by Kubes Steel.
Dec 07, 20122012.12.07 - Curved Structural Steel Roof BeamsCurved structural steel roof beams at the Lakeview Water Treatment plant rolled by Kubes Steel.
Dec 03, 20122012.12.03 - Structural Steel Roof Beams at the Lakeview Water Treatment PlantRoof beams of the Lakeview Water Treatment Plant were rolled by Kubes Steel.
Nov 27, 20122012.11.27 - Structural Steel Sections Lakeview Water Treatment PlantSteel erection work continues at the Lakeview Water Treatment Plant which features rolled steel sections by Kubes Steel.
Nov 16, 20122012.11.16 - Rolled Roof Sections & HSSAs the roof of the Lakeview Water Treatment nears completion, another section gets an addition featuring rolled HSS by Kubes Steel.
Nov 13, 20122012.11.13 - Curved Staircase - Brotherhood of CarpentersInstallation of the curved architectural staircase custom fabricated by Kubes Steel.
Oct 24, 20122012.10.24 - Iron Workers at Lakeview Water Treatment Plant ExpansionA couple of iron workers sit on the rolled structural steel beams that were rolled by Kubes Steel. The steel erection was taking place at the Lakeview Water Treatment plant in Mississauga, Ontario.
Oct 18, 20122012.10.18 - Lakeview Water Treatment Expansion Looking UpProgress being made at the Lakeview Water Treatment Plant. Rolled structural steel sections by Kubes Steel.
Oct 11, 20122012.10.11 - Steel Sections Sunny DayRolled steel sections by Kubes Steel get a bit of sunshine at the expanded Lakeview Water Treatment plant in Mississauga, Ontario.
Oct 03, 20122012.10.03 - Draft Tube Liner Penstock SectionsAssembled sections make up a draft tube liner (penstock) for the Cannelton Hydro Project.
Aug 17, 20122012.08.17 - Rolled Structural Steel Sections at LakeviewThe new expansion of the Lakeview Water Treatment Plant features a roof with rolled structural steel sections by Kubes Steel.
Aug 16, 20122012.08.16 - Rotor DrumsRotor drums rolled on the plate roll and fabricated by Kubes Steel for the Cannelton Hydro Project.
Aug 02, 20122012.08.02 - Section Bending the Hard WaySection bending large steel beams the Hard Way on the Roundo R13 Pyramid Rolling Machine at Kubes Steel.
Jul 25, 20122012.07.25 - Penstock Section Shipping OutA section of draft tube liner (penstock) for the Cannelton Hydro Project shipping out from the Jones Road shop.
Jul 23, 20122012.07.23 - Aluminum Maintenance PlatformCompleted custom fabricated maintenance mezzanine platform made from light weight, corrosion resistant aluminum.
Jul 13, 20122012.07.13 - Rotor SupportIndustrial fabricated rotor support by Kubes Steel for the Cannelton Hydro Project.
Jun 21, 20122012.06.21 - Rolled Steel Sections Shipping OutRolled steel sections by Kubes Steel shipping out to be installed at the new Lakeview Water Treatment Plant in Mississauga, Ontario.
Jun 12, 20122012.06.12 - Rotor Lifting DeviceIndustrial fabricated rotor lifting device part of the Cannelton Hydro Project.
Dec 22, 20112011-12-22 - Rolling and Bending in the ShopLots of different kids of material in the rolling and bending shop: channel, HSS, section and angle.
Nov 18, 20112011.11.18 - Deflector ConeA deflector cone fabricated by Kubes Steel for the Cannelton Hydro Project.
Nov 17, 20112011.11.17 - Draft Tube Penstock FabricationCustom Fabrication of a Draft Tube Penstock a Kubes Steel for the Cannelton Hydro Project.
Nov 09, 20112011.11.09 - Centering Deflector ConeCustom Fabrication of a Centering Deflector Cone at Kubes Steel.
Oct 18, 20112011.10.18 - Newtown Creek Wastewater Treatment PlantMichael Walch participated in the annual Open House New York architecture crawl and took some amazing pictures of the Newtown Creek digesters. The digesters feature stainless steel railings ... more
Oct 15, 20112011.10.15 - Newtown Creek Digester EggsImportant accessories to the main plant's work, the Digester Eggs at Newtown Creek feature a system of stainless steel railings for workers and visitors manufactured by Kubes Steel. Photo © Ty Law
Aug 16, 20112011-08-16 - Brake Press Set UpSetting up the brake press at Kubes Steel.
Aug 15, 20112011.08.15 - Custom Fabricated PenstockCustom fabrication of penstock sections for the Cannelton Hydro Project in mid August, 2011.
Dec 21, 20102010.12.21 - Rolled Aluminum RingsPhotos of rolled aluminum rings by Kubes Steel.
Sep 28, 20102010.09.28 - CNC Brake Press
Sep 28, 20102010.09.28 - Brake Press ConePress Brake/Brake Press forming a cone at Kubes Steel.
Apr 21, 20102010.04.21 - Newtown Creek Wastewater Treatment PlantFrom the New York City Environmental Protection Agency, located in Brooklyn’s Greenpoint community, Newtown Creek is the largest of New York City’s 14 wastewater treatment plants. Plant expansion and... more
Oct 11, 20092009.10.11 - Open House New York 2009 Newtown Creek Wastewater Treatment PlantKubes Steel manufactured the stainless steel railing for the Newtown Creek Wastewater Treatment Plant giving people the chance to take amazing photos like this one! Original photo © Mitch Waxman
Aug 07, 20092009.08.07 - A view of Manhattan's skyline from the eggA view of the Manhattan skyline from the top of the Newtown Digester egg. Kubes Steel manufactured the stainless steel railing for the walkways at the top of the eggs where this photo was taken from... more
Sep 19, 20082008.09.19 - Super Market Barricade PipeSections of super market barricade pipe bent on the Kubes Steel Rotary Draw Bender.
Sep 09, 20082008.09.09 - AESS Arches Rolled by Kubes Yankee StadiumPhoto of the AESS arches rolled by Kubes Steel for Yankee Stadium, New York, New York.
Jul 09, 20082008.07.09 - AESS Rolled by Kubes Yankee Stadium, New YorkDifferent photos of the arches using the rolled AESS by Kubes Steel for Yankee Stadium, New York, New York.
Mar 13, 20082008.03.13 - Brake Press ConesCones formed from steel plate on the brake press at Kubes Steel.
Mar 13, 20082008.03.13 - Pipe Bent by Kubes Steel on the Rotary Draw BenderSections of pipe bent at Kubes Steel on the rotary draw bender ready to be shipped out.
Mar 13, 20082008.03.13 - Rotary Draw Bending Pipe
Feb 08, 20082008.02.08 - Pipe Bent on the Rotary Draw Bender Ready for ShipmentPipe bent on the Kubes Steel rotary draw bender ready to be shipped out.
Feb 07, 20082008.02.07 - Rolling a Steel Section the Easy Way to a Tight RadiusA section of structural steel gets rolled to a very tight radius at Kubes Steel on the Roundo R13.
Feb 06, 20082008.02.06 - Rotary Draw Bending Threaded PipeShort threaded pipe sections getting bent on the rotary draw bender at Kubes Steel.
Feb 06, 20082008.02.06 - Rolled Aluminum ChannelSections of aluminum channel rolled toe in at the Kubes Steel rolling and bending shop.
Feb 05, 20082008.02.05 - Toe In Toe Out ChannelSections of rolled channel, rolled toe in and rolled toe out ready for shipment at Kubes Steel.
Feb 05, 20082008.02.05 - Angle Rolling & BendingPhotos of rolled angles ready for shipment.
Jan 31, 20082008.01.31 - Rotary Draw Bending PipeRotary draw bending stainless steel pipe at the Kubes Steel rolling and bending shop.
Jan 06, 20082008.01.06 - Intel CES 2008 Laptop DisplayPipe bent by Kubes Steel as part of the Intel CES 2008 Display.
Jan 04, 20082008.01.04 - Channel Rolled Toe OutA large section of steel channel gets rolled toe out at Kubes Steel.
Dec 31, 20072007.12.31 - Angle Rolling Leg OutA section of steel angle gets rolling leg out at Kubes Steel.
Dec 10, 20072007.12.10 - Pipe Bending for the 2008 Intel CES DisplayPipe bent for the 2008 Intel CES Display gets assembled at Kubes Steel.
Nov 27, 20072007.11.27 - Rolling HSS the Easy way for a Curtain Wall SupportKubes Steel rolling rectangular HSS the easy way for a curtain wall support project. Job being done on the Roundo R13.
Nov 02, 20072007.11.02 - Steel Channel Rolled Toe Out to a Tight RadiusA section of steel channel being rolled toe out to a tight radius at the Kubes Steel rolling and bending shop.
Nov 02, 20072007.11.02 - Complex Rolling of Structural Steel for a MonorailStructural steel section being rolled cold on the Roundo R13 into a complex curve for a Monorail transportation project.
Aug 23, 20062006.08.23 - Rolled tubing for an oil and gas pipeline ships outSections of rolled metal tubing for an oil and gas pipeline ships out from Kubes Steel.
Jul 25, 20062006.07.25 - Brake Press Forming Steel AngleBrake press forming steel angle at Kubes Steel.
Jul 25, 20062006.07.25 - Pipeline BendingA large, thick section of pipe gets bent at the Kubes Steel rolling and bending shop.
Jul 13, 20062006.07.13 - Stacks of Rolled Steel ChannelStacks of rolled steel channel at the Kubes Steel rolling and bending plant.
Jul 12, 20062006.07.12 - Caesars Windsor Awning DaytimePhotos of the awning at Caesars Windsor Casino. The awning features rolled steel from Kubes Steel.
Jul 11, 20062006.07.11 - Caesars Windsor Awning at NightThe light up awning outside of Caesars Windsor Casino features rolled steel by Kubes Steel.
Jun 20, 20062006.06.20 - Spirit of DiscoveryPhotos of the installed Spirit of Discovery stainless steel, bronze sculpture outside the Donnelly Centre of Cellular and Biomolecular Research at the University of Toronto, Ontario, Canada.
Jan 03, 20062006.01.03 - Stretch forming Aluminum ExtrusionsStretch forming an aluminum extrusion at Kubes Steel.
Jul 25, 20052005.07.25 - Spirit of Discovery TorontoPhotos of the recent installation of the Spirit of Discovery stainless steel and bronze sculpture by Dam De Nogales at the University of Toronto.
Sep 10, 20042004.09.10 - Western Fairgrounds IndoorsInside photos of the rolled structural steel from Kubes Steel at the Western Fairgrounds.
Aug 23, 20042004.08.23 - Rafaga UnleashedSome pictures from different angles of the Rafaga Unleashed stainless steel and bronze sculpture at Pier 8, Hamilton Harbor, Ontario.
Aug 23, 20042004.08.23 - Stainless Steel Pipe FabricationPhotos taken from Front Street in Toronto, Ontario showing the fabricated stainless steel AESS sculpture wrapped around a pedestrian bridge connecting to residential condo towers.
Aug 23, 20042004.08.23 - Budds' BMWPhotos from the summer of 2004. Kubes Steel supplied the rolled steel for the construction of the new Budds' BMW dealership in Oakville, Ontario.
Jul 21, 20042004.07.21 - Rafaga Unleashed Pier 8The completed sculpture at Pier 8 in Hamilton, Ontario.
Jun 24, 20042004.06.24 - Fabricated Steel Staircase Avon World HeadquartersFabricated Steel Staircase for the Avon World Headquarters in New York, New York.
Jun 17, 20042004.06.17 - Sail AngleRafaga Unleashed nearing completion inside the shop.
Jun 17, 20042004.06.17 - Custom Fabricated Steel Staircase Avon World HeadquartersCustom fabricated steel staircase for the Avon World Headquarters nearing completion.
Jun 13, 20042004.06.13 - Custom Fabricated Steel Staircase Avon World HeadquartersProgress of the custom fabricated steel staircase for Avon World Headquarters.
Jun 08, 20042004.06.08 - Rolled ChannelA collection of rolled steel channel at the Kubes Steel rolling and bending shop.
Jun 06, 20042004.06.06 - Rafaga UnleashedMore photos in progress including a closeup of part of the stainless steel pipe where it connects to another piece.
Jun 02, 20042004.06.02 - Rafaga UnleashedSome close-up shots of the progress of Rafaga Unleashed fabrication.
Jun 01, 20042004.06.01 - Custom Fabricated Steel Staircase Avon World HeadquartersEarly phase in the fabrication of a steel staircase for the Avon World Headquarters in New York.
May 25, 20042004.05.25 - Rafaga UnleashedA section of the sail taking shape.
May 11, 20042004.05.11 - Rafaga UnleashedPhotos of the progress being made on the fabrication of Rafaga unleashed.
May 10, 20042004.05.10 - Rafaga UnleashedSome photos showing the progress of Rafaga unleashed inside the Kubes Steel shop on May 10th, 2004.
May 07, 20042004.05.07 - Western Fairgrounds under constructionPhotos of the construction progress of the Western Fairgrounds featuring rolled structural steel (AESS) rolled by Kubes Steel.
May 04, 20042004.05.04 - Audi Dealership OakvilleSteel rolled by Kubes Steel was part of the contruction of the new Audi Dealership in Oakville, Ontario.
May 04, 20042004.05.04 - Budds' BMWKubes Steel supplied rolled steel for the contruction of the new Budds' BMW dealership.
May 04, 20042004.05.04 - Mercedes Dealership Aluminum FramingKubes Steel supplied the rolled aluminum for the outside framing feature of this Mercedes Dealership in Mississauga, Ontario.
May 04, 20042004.05.04 - On site with the trellisOn site of the recently installed custom fabricated steel trellis in Burlington-Aldershot, Ontario outside the TD Canada Trust branch on Plains Road West. Custom manufactured by Kubes Steel.
Mar 08, 20042004.03.08 - Hess Village AESS Arches Rolled by KubesRolled steel as part of the AESS Arches in Hess Village, Hamilton, Ontario. Steel rolled by Kubes Steel.
Feb 23, 20042004.02.23 - Fabrication & Assembly of Stainless Steel AESS Pipe SculptureStainless steel AESS pipe sculpture being fabricated in house at Kubes Steel.
Feb 20, 20042004.02.20 - Custom Fabricated Rolled CylindersCustom Fabricated Rolled Cylinders.
Feb 13, 20042004.02.13 - Refractory Casting TowerOne of the last custom fabricated refractory casting tower manufactured by Kubes for a steel mill.
Jan 29, 20042004.01.29 - Refractory Casting TowersPainted refractory casting towers manufactured by Kubes Steel for a steel mill.
Jan 20, 20042004.01.20 - Channel Rolled SectionA section of steel channel gets rolled at Kubes Steel to a tight radius.
Jan 09, 20042004.01.09 - Rolling a Steel Beam the Hard WayA steel beam gets rolled the hard way at Kubes Steel.
Dec 21, 20032003.12.21 - Refractory Casting Towers3 refractory casting towers custom fabricated by Kubes Steel for a Steel Mill.
Dec 10, 20032003.12.10 - Refractory Casting TowersInside and outside shots of a custom fabricated refractory casting tower for a Steel Mill by Kubes Steel.
Dec 08, 20032003.12.08 - Rolling a Tee the Hardway (Stem In)Rolling a steel tee the hardway (stem in)
Nov 27, 20032003.11.27 - Refractory Casting TowersCustom fabricated refractory casting towers manufactured by Kubes Steel for a steel mill.
Nov 27, 20032003.11.27 - Diamond Mine Custom FabLarge heavy custom fabrication for a diamond mine.
Nov 13, 20032003.11.13 - Diamond Mine Custom FabDifferent custom fabricated components for a dimond mine in the mining industry.
Sep 30, 20032003.09.30 - HSS (Hollow Structural Section) RollingHSS (Hollow Structural Sections) rolled by Kubes Steel at the Kubes rolling and bending shop on Arvin Avenue in Stoney Creek, Ontario.
Sep 03, 20032003.09.03 - Fabricated Steel TrellisFabricated steel trellis fabricated at Kubes Steel pre-painting.
Jun 24, 20032003.06.24 - Custom Fabrication Shipping OutCustom fabrication job shipping out from Kubes Steel in Stoney Creek, Ontario.
Apr 16, 20032003.04.16 - Custom Fabricated Rolled CylindersCustom fabricated rolled cylinders in the spring of 2003.
Apr 10, 20032003.04.10 - Rolled Aluminum RingsPhotos of rolled aluminum rings ready to be shipped out to the customer.
Oct 10, 20012001.10.10 - Fabricated Steel Staircase Car DealershipInstalled fabrication of an architectural steel staircase at a car dealership in Hamilton, Ontario on Upper James.
Jan 15, 20002000.01.15 - Calcine Transfer ContainerCalcine transfer container custom fabricated by Kubes Steel.
Jan 05, 20002000.01.05 - Calcine Transfer ContainerCustom fabricated calcine transfer container manufactured by Kubes Steel.
Dec 22, 19991999.12.22 - Calcine Transfer Container FabricationClose up of some of the fabrication work for the calcine transfer container manufactured by Kubes Steel.
Jan 06, 19941994.01.06 - Early examples of cones formed at KubesEarly examples of cones formed at Kubes Steel, 1994.
Jan 11, 19931993.01.11 - Heavy Industrial Fab Job Shipping out from Kubes SteelA heavy, industrial fabrication shipping out from Kubes Steel.
Oct 02, 19921992.10.02 - Burner AssemblyFront and back views of the finished custom fabricated burner assembly by Kubes Steel.
Sep 30, 19921992.09.30 - Burner Assembly Custom FabricationNearing completion, burner assembly custom fabrication by Kubes Steel.
Sep 28, 19921992.09.28 - Burner Assembly Custom FabricationBurner assembly coming together at Kubes Steel.
Sep 17, 19921992.09.17 - Burner Assembly Custom FabProgress being made on the custom fab of the burner assembly by Kubes Steel.
Sep 16, 19921992.09.16 - Burner Assembly Custom Fabricated ComponentA custom fabricated component for the burner assembly, manufactured at the Jones Road shop in 1992.
Sep 14, 19921992.09.14 - Custom Fab Burner AssemblySections of the burner assembly being custom fabricated by Kubes Steel. Steel rolled on the plate roll into a cylinder and a cone.
Sep 12, 19921992.09.12 - Burner Assembly Base Custom FabCustom fabricated base for the burner assembly manufactured at the Jones Road shop in 1992.
Sep 12, 19921992.09.12 - Burner Assembly Custom FabricationPhotos showing progress on the burner assembly for a chemical plant, custom fabricated by Kubes Steel in 1992.
Jul 22, 19921992.07.22 - Burner Assembly FabricationPhotos showing the progress of the custom fabrication of a chemical burner assembly.
Jul 20, 19921992.07.20 - Fabricated Fan Housing Assembly Shipping OutFabricated fan assembly shipping out from Kubes Steel in Stoney Creek, Ontario.
Jul 18, 19921992.07.18 - Fabricated Fan Housing Assembly Ready to ShipCompleted fabricated fan housing assembly in the Kubes Steel yard awaiting shipment.
Jul 01, 19921992.07.01 - Fabricated Fan Housing AssemblyFabricated fan housing assembly by Kubes Steel, 1992.
Jun 27, 19921992.06.27 - Fabricated Fan Housing AssemblyFurther progress of our fabricated fan housing assembly.
Jun 20, 19921992.06.20 - Fabricated Fan Housing AssemblyEarly stages of fabricating a fan housing assembly at Kubes Steel.
Feb 21, 19911991.02.21 - Fabricated Railing and Mezzanine PlatformPhoto at the Atox Cement Mill showing the fabricated steel railing and mezzanine by Kubes Steel.
Apr 30, 19901990.04.30 - Completed Custom Fabricated Penstock SectionsCompleted sections of the hydroelectric penstock custom fabricated at Kubes Steel.
Apr 25, 19901990.04.25 - Custom Fabricated Penstock AssembledAssembled custom fabricated penstock for a hydroelectric power generation project.
Feb 21, 19901990.02.21 - Custom Fabricated Penstock SectionsKubes staff with sections of the hydroelectric penstock custom fabricated at Kubes Steel.
Apr 01, 19881988.04.01 - Hydraulic Turbine Spiral Scroll CaseHydraulic turbine spiral scroll case, one of three manufactured by Kubes Steel. These units were fully assembled, tested and painted before being shipped to an installation site in the United States.
Mar 01, 19881988.03.01 - Hydraulic Spiral Scroll CaseOne of three custom fabricated hydraulic spiral scroll cases manufactured by Kubes Steel.